Products > Dry Mortars

MATOX 125SM – mortar for bonding spatterdash of plaster (Premium)


MATOX 125SM is a pre-mixed, cement-based mortar for bonding spatterdash of plaster. It offers excellent adhesion to the substrate. Excellent workability. Simplification and acceleration of application.


Preparation

Before applying the mortar remove dust, grease, loose particles and algae. Fill holes and other gaps with lime-cement mortar two to three days before applying mortar. Two to three hours before applying mortar, wet the surfaces with water; and on concrete surfaces apply MATOX 800KB (concrete-contact) primer.

Application

The application of MATOX 125SM interior mortar is done using the appropriate pump (PFT G4, G5; M-TEC M300). Dry mortar mix is continuously delivered to the machine reservoir where it is automatically mixed with water in the approximate ratio 5:1. The prepared mortar is then delivered through the hose on to the wall or ceiling surface by the pump. The ground mortar is applied 1 to 2 day after MATOX 125SM application.

masinski spric malter

Specifications

Obradivost/Workability: > 180 min.
Pokrivnost/Coverage: 20 kg/m²/2cm debljine
Sušenje/Drying time: 1 dan/cm debljine
Tvrdoća/Hardness: klasa M1/class M1
Pakovanje/Packaging: vreća/sack
Skladištenje/Storage: 12 meseci / 12 months

Tip

Before application wet the surfaces with water, and on concrete surfaces apply MATOX 800KB (concretecontact).