Products > Skimming Compounds

MATOX 305G – lime based skim coat for interior (Standard)


MATOX 305G is designed for fine skimming of interior walls and ceilings of concrete surfaces, greenboards (gypsum boards) or surfaces treated with mortars before painting. It is easily prepared and applied. It stays firm after drying and gives flat and smooth off-white surface. It can be apply using a machine (pump).


Preparation

Stir MATOX 305G mortar into clean, clear water until it is completely free of lumps. Approx. 7-8 l of water are needed to prepare 25 kg (mixing ratio 3:1). MATOX 305G adheres to all solid, load-bearing, clean, dry and moist surfaces free of substances which ca cause separation. Remove any coatings with inadequate bearing strength. The prepared mix should rest at room temperature for 10 to 15 minutes before application. Before applying MATOX 305G to walls and ceilings, stir the prepared mix well. If needed, correct the density of the mix by carefully adding clean water

Applications

The ready mortar should be applied on the surface with a steel trowel in layers of 1 to 2 mm in thickness. It can be applied in multiple layers, usually two, alowing for drying time between layers. If needed, after drying each layer can be smoothed with fine sandpaper.

krecna glet masa za enterijer

Specifications

Obradivost/Workability: > 120 min.
Potrošnja/Coverage: 1-1,5 kg/m²
Mešanje/Mixing ratio: 7 litara vode / 20kg
Boja/Color: prljavo bela / off-white
Pakovanje/Packaging: vreća 20kg / 20kg sack
Skladištenje/Storage: 12 meseci / 12 months

Tip

On surfaces with high or different absorption levels apply acrylic primer (Scala MicroDISPERSER) before plastering.

Related products: