Products > Skimming Compounds

MATOX 310S – cement based skim coat for exterior (Premium)


MATOX 310S is designed for fine skimming of exterior facade surfaces before painting or applying acrylic or silicate decorative mortars. It is easily prepared and applied. It stays firm after drying and gives flat and smooth white surface.


Preparation

Stir MATOX 310S mortar into clean, clear water until it is completely free of lumps. Approx. 7-8 l of water are needed to prepare 25 kg (mixing ratio 3:1). MATOX 310S adheres to all solid, load-bearing, clean, dry and moist surfaces free of substances which ca cause separation. Remove any coatings with inadequate bearing strength. The prepared mix should rest at room temperature fore 10 to 15 minutes before application. Before applying MATOX 310S to walls and ceilings, stir the prepared mix well. If needed, correct the density of the mix by carefully adding clean water

Applications

The ready mortar should be applied on the surface with a steel trowel in layers of 1 to 2 mm in thickness. It can be applied in multiple layers, usually two, allowing for drying time between layers. If needed, after drying each layer can be smoothed with fine sandpaper. If the material is applied on high daily temperatures, protect the surface from direct sunlight.

MATOX 310S - cementna glet masa za fasade (Premium)

Specifications

Obradivost/Workability: > 120 min.
Potrošnja/Coverage: 1-1,5 kg/m²
Mešanje/Mixing ratio: 7-8 litara vode / 25kg
Boja/Color: bela / white
Pakovanje/Packaging: vreća 25kg / 25kg sack
Skladištenje/Storage: 12 meseci / 12 months

Tip

On surfaces with high or different absorption levels apply acrylic (Scala MicroDISPERSER) or silicate primer (Scala BetoPRIME) before plastering.